Browse Definitions :
Definition

volt per meter (V/m)

What is volt per meter (V/m)?

Volt per meter is the standard unit of electric field (E field) strength. Symbolically, it is represented as V/m. An E field of 1 V/m refers to a potential difference of 1 V between two points 1 m apart.

In base Standard International (SI) units, 1 V/m is the equivalent of 1 meter per kilogram per second cubed per ampere. This is represented as m . kg . s -3 . A -1.

Volt per meter explained

When electricity flows through an electrical conductor, it produces an electromagnetic field (EM field or EMF). This EMF contains both a magnetic (M) and electric (E) component. Volt per meter indicates the strength or intensity of the E field in the EM field. Simply put, if 1 V is applied between two infinite parallel planes spaced 1 m apart, the electric field strength is 1 volt per meter.

Example

Consider a parallel plate capacitor.

Situation 1

Suppose 1.5 V are applied across the capacitor whose plates are 1.5 m apart. The E field strength can be expressed in terms of V/m as the following:

E field = 1.5 V / 1.5 m = 1 V/m

Situation 2

Now, if the plates are moved toward each other so that the distance between them is 1 millimeter, the E field changes to the following:

E field = 1.5 V / 0.001 m = 1,500 V/m

Situation 3

The distance between the plates remains 1.5 m. However, a higher voltage (say 3 volts) is applied between them. The E field can now be measured as the following:

E field = 3 V / 1.5 m = 2 V/m

This example shows that volt per meter is affected by both the distance between the conductor's plates and the voltage applied between them.

The higher the source voltage, the higher the strength of the E field. This strength also decreases as the distance from the source increases and if there are shields, such as walls, houses or trees, in place.

Volt per meter is a vector quantity since it is characterized by both magnitude and direction.

Fractional and multiple values of volt per meter

In a distant radio transmitter, the magnitude of the E field is often much less than 1 V/m. In such cases, fractional units are preferred to represent it. The most commonly used fractional units are as follows:

  • Millivolt per meter
  • Microvolt per meter
  • Nanovolt per meter
  • Picovolt per meter

Figure 1 shows how these values convert to volt per meter.

Conversion to volt per meter table
Figure 1. How various values convert to volt per meter values

Multiples of volt per meter are represented as shown in Figure 2.

Conversion to multiples of volt per meter table
Figure 2. How multiples of volt per meter are represented for various fractional values

Volt per meter versus power in watts

The electric field created by the operation of a transmitter is usually represented in mV/m or uV/m. A watt is the unit that describes the amount of power generated by the transmitter.

A transmitter that generates constant power can produce E fields of different strengths, depending on the type of transmission line and antenna connected to it. In general, power and E field are related by the following formula:

(P. G) /(4 . π . d2) = (E2) / 120

The following explains the variables in the formula:

  • P = transmitter power (watts)
  • G = numerical gain of the transmitting antenna (for a unity gain antenna, G = 1)
  • d = distance of the measuring point from the electrical center of the antenna (meters)
  • E = field strength (V/m)
  • 4 . π . d2 = surface area of the sphere centered at the radiating source

The E field causes interference in radio communications. Also, it does not directly correspond to the level of transmitter power. This is why the emission limits of broadcasting transmitters and short-range devices are specified in field strength.

Volt per meter and newton per coulomb

A newton per coulomb (N/C) is also a unit of the strength of the electric field in the SI system. An E field of 1 N/C is created if 1 V is applied between two infinite parallel planes spaced 1 m apart.

Mathematically, the electric field can be represented as the following:

E = F/Q

The variables in this formula are as follows:

Q = charge present in space

F = force exerted by Q on any other charge in its vicinity

The SI unit of F is 1 Newton (N) and the unit of C is 1 coulomb (C).

So, E = 1 N/1C = NC-1.

At the same time, when a new charge q is in the vicinity of charge Q, a force of repulsion acts on q. This charge can be moved through a distance in the field by applying some work (W) on it. The work done per unit charge is the electric potential, which is represented as the following:

V = W/q

But also:

work = force x displacement = F . d

Therefore:

V = F . d/q = E . d = V/d

In SI units, the unit of electric potential is volt (V) and the unit of displacement is meter (m). Therefore, the unit of electric field is as follows:

E = (1 V)/(1 m) = V/m

From the above, we can see that 1 V/m is equivalent to 1 N/C. This is why both volts per meter and newtons per coulomb are used to represent the strength of an electric field.

See also: Table of Physical Units

This was last updated in June 2022

Continue Reading About volt per meter (V/m)

Networking
  • firewall as a service (FWaaS)

    Firewall as a service (FWaaS), also known as a cloud firewall, is a service that provides cloud-based network traffic analysis ...

  • private 5G

    Private 5G is a wireless network technology that delivers 5G cellular connectivity for private network use cases.

  • NFVi (network functions virtualization infrastructure)

    NFVi (network functions virtualization infrastructure) encompasses all of the networking hardware and software needed to support ...

Security
  • virus (computer virus)

    A computer virus is a type of malware that attaches itself to a program or file. A virus can replicate and spread across an ...

  • Certified Information Security Manager (CISM)

    Certified Information Security Manager (CISM) is an advanced certification that indicates that an individual possesses the ...

  • cryptography

    Cryptography is a method of protecting information and communications using codes, so that only those for whom the information is...

CIO
  • IT project management

    IT project management is the process of planning, organizing and delineating responsibility for the completion of an ...

  • chief financial officer (CFO)

    A chief financial officer (CFO) is the corporate title for the person responsible for managing a company's financial operations ...

  • chief strategy officer (CSO)

    A chief strategy officer (CSO) is a C-level executive charged with helping formulate, facilitate and communicate an ...

HRSoftware
  • HR automation

    Human resources automation (HR automation) is a method of using software to automate and streamline repetitive and laborious HR ...

  • compensation management

    Compensation management is the discipline and process for determining employees' appropriate pay and benefits.

  • HR technology (human resources tech)

    HR technology (human resources technology) is an umbrella term for hardware and software used to automate the human resource ...

Customer Experience
  • martech (marketing technology)

    Martech (marketing technology) refers to the integration of software tools, platforms, and applications designed to streamline ...

  • transactional marketing

    Transactional marketing is a business strategy that focuses on single, point-of-sale transactions.

  • customer profiling

    Customer profiling is the detailed and systematic process of constructing a clear portrait of a company's ideal customer by ...

Close